Course Calendar
Our calendar displays the dates and times each course will be running on and includes any important information you require.
Get in touch on 01827 895 655 to book onto a course or click the button below to enquire.
october
27sep01octMobile Crane Course CPCS A605-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£2456.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
September 27 (Monday) 8:30 am - October 1 (Friday) 3:30 pm
29sep01octMobile Crane Course CPCS A603 days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1656.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
September 29 (Wednesday) 8:30 am - October 1 (Friday) 3:30 pm
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1112.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
4 (Monday) 8:30 am - 6 (Wednesday) 3:30 pm
04oct(oct 4)8:30 am08(oct 8)3:30 pmDozer CPCS A345-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1456.00 + VAT per person
Time
4 (Monday) 8:30 am - 8 (Friday) 3:30 pm
05oct(oct 5)8:30 am06(oct 6)3:30 pmRide on Roller CPCS A312 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£556.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
5 (Tuesday) 8:30 am - 6 (Wednesday) 3:30 pm
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£812.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
5 (Tuesday) 8:30 am - 6 (Wednesday) 3:30 pm
05oct(oct 5)8:30 am06(oct 6)3:30 pmForward Tipping Dumper CPCS A09a2 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£556.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
5 (Tuesday) 8:30 am - 6 (Wednesday) 3:30 pm
06oct(oct 6)8:30 am08(oct 8)3:30 pmDozer CPCS A343-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£856.00 + VAT per person
Time
6 (Wednesday) 8:30 am - 8 (Friday) 3:30 pm
06oct(oct 6)8:30 am08(oct 8)3:30 pm360 Excavator above 10 tons CPCS A59a3 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£876.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
6 (Wednesday) 8:30 am - 8 (Friday) 3:30 pm
07oct(oct 7)8:30 am08(oct 8)3:30 pmDozer CPCS A342-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£656.00 + VAT per person
Time
7 (Thursday) 8:30 am - 8 (Friday) 3:30 pm
07oct(oct 7)8:30 am08(oct 8)3:30 pm360 Excavator above 10 tons CPCS A59a2 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£656.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
7 (Thursday) 8:30 am - 8 (Friday) 3:30 pm
11oct(oct 11)8:30 am15(oct 15)3:30 pm360 Excavator above 10 tons CPCS A59a5 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1256.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
11 (Monday) 8:30 am - 15 (Friday) 3:30 pm
11oct(oct 11)8:30 am15(oct 15)3:30 pm360 Excavator & Dumper CPCS A59a & A09a5 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1612.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
11 (Monday) 8:30 am - 15 (Friday) 3:30 pm
11oct(oct 11)8:30 am14(oct 14)3:30 pmTelehandler CPCS A17c4 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£856.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
11 (Monday) 8:30 am - 14 (Thursday) 3:30 pm
18oct(oct 18)8:30 am19(oct 19)3:30 pmLoader / Securer STGO CPCS A502-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1256.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
18 (Monday) 8:30 am - 19 (Tuesday) 3:30 pm
18oct(oct 18)8:30 am20(oct 20)3:30 pmArticulated Dump Truck CPCS A56b - All Sizes3-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£856.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
18 (Monday) 8:30 am - 20 (Wednesday) 3:30 pm
18oct(oct 18)8:30 am20(oct 20)3:30 pmTelehandler CPCS A17c3 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Maneuvering progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£756.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
18 (Monday) 8:30 am - 20 (Wednesday) 3:30 pm
19oct(oct 19)8:30 am20(oct 20)3:30 pmArticulated Dump Truck CPCS A56b - All Sizes2-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£656.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
19 (Tuesday) 8:30 am - 20 (Wednesday) 3:30 pm
25oct(oct 25)8:30 am29(oct 29)3:30 pmMobile Crane Course CPCS A605-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£2456.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
25 (Monday) 8:30 am - 29 (Friday) 3:30 pm
27oct(oct 27)8:30 am29(oct 29)3:30 pmMobile Crane Course CPCS A603 days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1656.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
27 (Wednesday) 8:30 am - 29 (Friday) 3:30 pm
27oct(oct 27)8:30 am29(oct 29)3:30 pmSlinger / Signaller CPCS A40a3 day course
Event Details
What does this course include? Attaching and preparing suspended loads for movement using lifting accessories in the workplace Guiding, positioning and placing suspended loads in the workplace Conforming to general
Event Details
What does this course include?
- Attaching and preparing suspended loads for movement using lifting accessories in the workplace
- Guiding, positioning and placing suspended loads in the workplace
- Conforming to general health, safety and welfare in the workplace
- Conforming to productive working practices in the workplace
What does this course cost?
£956.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
27 (Wednesday) 8:30 am - 29 (Friday) 3:30 pm
27oct(oct 27)8:30 am29(oct 29)3:30 pmCrane Supervisor CPCS A623 day course
Event Details
What does this course include? Developing and maintaining good occupational working relationships in the workplace Supervising Lifting Operations using lifting equipment in the workplace Maintaining systems for health, safety, welfare
more
Event Details
What does this course include?
- Developing and maintaining good occupational working relationships in the workplace
- Supervising Lifting Operations using lifting equipment in the workplace
- Maintaining systems for health, safety, welfare and environmental protection in the workplace
- Co-ordinating and organising the control of work in the workplace
- Allocating and monitoring the use of plant, equipment or machinery in the workplace
- Maintaining the dimensional accuracy of the work in the workplace
- Co-ordinating preparation work for site or lifting operations in the workplace
- Allocating work and checking people’s performance in the workplace
What does this course cost?
£956.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
27 (Wednesday) 8:30 am - 29 (Friday) 3:30 pm
28oct(oct 28)8:30 am29(oct 29)3:30 pmCrane Supervisor CPCS A622 day course
Event Details
What does this course include? Developing and maintaining good occupational working relationships in the workplace Supervising Lifting Operations using lifting equipment in the workplace Maintaining systems for health, safety, welfare
more
Event Details
What does this course include?
- Developing and maintaining good occupational working relationships in the workplace
- Supervising Lifting Operations using lifting equipment in the workplace
- Maintaining systems for health, safety, welfare and environmental protection in the workplace
- Co-ordinating and organising the control of work in the workplace
- Allocating and monitoring the use of plant, equipment or machinery in the workplace
- Maintaining the dimensional accuracy of the work in the workplace
- Co-ordinating preparation work for site or lifting operations in the workplace
- Allocating work and checking people’s performance in the workplace
What does this course cost?
£656.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
28 (Thursday) 8:30 am - 29 (Friday) 3:30 pm
28oct(oct 28)8:30 am29(oct 29)3:30 pmSlinger / Signaller CPCS A40a2 day course
Event Details
What does this course include? Attaching and preparing suspended loads for movement using lifting accessories in the workplace Guiding, positioning and placing suspended loads in the workplace Conforming to general
Event Details
What does this course include?
- Attaching and preparing suspended loads for movement using lifting accessories in the workplace
- Guiding, positioning and placing suspended loads in the workplace
- Conforming to general health, safety and welfare in the workplace
- Conforming to productive working practices in the workplace
What does this course cost?
£656.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
28 (Thursday) 8:30 am - 29 (Friday) 3:30 pm
november
01nov8:30 am03(nov 3)3:30 pmForward Tipping Dumper & Ride on Roller CPCS A09a & A313 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1112.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
1 (Monday) 8:30 am - 3 (Wednesday) 3:30 pm
01nov8:30 am05(nov 5)3:30 pmDozer CPCS A345-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1456.00 + VAT per person
Time
1 (Monday) 8:30 am - 5 (Friday) 3:30 pm
02nov(nov 2)8:30 am03(nov 3)3:30 pmRide on Roller CPCS A312 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£556.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
2 (Tuesday) 8:30 am - 3 (Wednesday) 3:30 pm
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£812.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
2 (Tuesday) 8:30 am - 3 (Wednesday) 3:30 pm
02nov(nov 2)9:00 am03(nov 3)5:00 pmForward Tipping Dumper CPCS A09a2 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£556.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
2 (Tuesday) 9:00 am - 3 (Wednesday) 5:00 pm
03nov(nov 3)8:30 am05(nov 5)3:30 pmDozer CPCS A343-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£856.00 + VAT per person
Time
3 (Wednesday) 8:30 am - 5 (Friday) 3:30 pm
04nov(nov 4)8:30 am05(nov 5)3:30 pmDozer CPCS A342-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£656.00 + VAT per person
Time
4 (Thursday) 8:30 am - 5 (Friday) 3:30 pm
08nov(nov 8)8:30 am11(nov 11)3:30 pmTelehandler CPCS A17c4 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£856.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
8 (Monday) 8:30 am - 11 (Thursday) 3:30 pm
08nov(nov 8)8:30 am12(nov 12)3:30 pm360 Excavator above 10 tons CPCS A59a5 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1256.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
8 (Monday) 8:30 am - 12 (Friday) 3:30 pm
08nov(nov 8)8:30 am12(nov 12)3:30 pm360 Excavator & Dumper CPCS A59a & A09a5 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1612.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
8 (Monday) 8:30 am - 12 (Friday) 3:30 pm
16nov(nov 16)8:30 am18(nov 18)3:30 pmTelehandler CPCS A17c3 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Maneuvering progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£756.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
16 (Tuesday) 8:30 am - 18 (Thursday) 3:30 pm
16nov(nov 16)8:30 am18(nov 18)3:30 pm360 Excavator above 10 tons CPCS A59a3 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£876.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
16 (Tuesday) 8:30 am - 18 (Thursday) 3:30 pm
17nov(nov 17)3:30 am18(nov 18)3:30 pm360 Excavator above 10 tons CPCS A59a2 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£656.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
17 (Wednesday) 3:30 am - 18 (Thursday) 3:30 pm
17nov(nov 17)8:30 am18(nov 18)3:30 pmTelehandler CPCS A17c2 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£556.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
17 (Wednesday) 8:30 am - 18 (Thursday) 3:30 pm
22nov(nov 22)8:30 am23(nov 23)3:30 pmLoader / Securer STGO CPCS A502-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1256.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
22 (Monday) 8:30 am - 23 (Tuesday) 3:30 pm
24nov(nov 24)8:30 am26(nov 26)3:30 pmCrane Supervisor CPCS A623 day course
Event Details
What does this course include? Developing and maintaining good occupational working relationships in the workplace Supervising Lifting Operations using lifting equipment in the workplace Maintaining systems for health, safety, welfare
more
Event Details
What does this course include?
- Developing and maintaining good occupational working relationships in the workplace
- Supervising Lifting Operations using lifting equipment in the workplace
- Maintaining systems for health, safety, welfare and environmental protection in the workplace
- Co-ordinating and organising the control of work in the workplace
- Allocating and monitoring the use of plant, equipment or machinery in the workplace
- Maintaining the dimensional accuracy of the work in the workplace
- Co-ordinating preparation work for site or lifting operations in the workplace
- Allocating work and checking people’s performance in the workplace
What does this course cost?
£956.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
24 (Wednesday) 8:30 am - 26 (Friday) 3:30 pm
24nov(nov 24)8:30 am26(nov 26)3:30 pmSlinger / Signaller CPCS A40a3 day course
Event Details
What does this course include? Attaching and preparing suspended loads for movement using lifting accessories in the workplace Guiding, positioning and placing suspended loads in the workplace Conforming to general
Event Details
What does this course include?
- Attaching and preparing suspended loads for movement using lifting accessories in the workplace
- Guiding, positioning and placing suspended loads in the workplace
- Conforming to general health, safety and welfare in the workplace
- Conforming to productive working practices in the workplace
What does this course cost?
£956.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
24 (Wednesday) 8:30 am - 26 (Friday) 3:30 pm
25nov(nov 25)8:30 am26(nov 26)3:30 pmSlinger / Signaller CPCS A40a2 day course
Event Details
What does this course include? Attaching and preparing suspended loads for movement using lifting accessories in the workplace Guiding, positioning and placing suspended loads in the workplace Conforming to general
Event Details
What does this course include?
- Attaching and preparing suspended loads for movement using lifting accessories in the workplace
- Guiding, positioning and placing suspended loads in the workplace
- Conforming to general health, safety and welfare in the workplace
- Conforming to productive working practices in the workplace
What does this course cost?
£656.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
25 (Thursday) 8:30 am - 26 (Friday) 3:30 pm
25nov(nov 25)8:30 am26(nov 26)3:30 pmCrane Supervisor CPCS A622 day course
Event Details
What does this course include? Developing and maintaining good occupational working relationships in the workplace Supervising Lifting Operations using lifting equipment in the workplace Maintaining systems for health, safety, welfare
more
Event Details
What does this course include?
- Developing and maintaining good occupational working relationships in the workplace
- Supervising Lifting Operations using lifting equipment in the workplace
- Maintaining systems for health, safety, welfare and environmental protection in the workplace
- Co-ordinating and organising the control of work in the workplace
- Allocating and monitoring the use of plant, equipment or machinery in the workplace
- Maintaining the dimensional accuracy of the work in the workplace
- Co-ordinating preparation work for site or lifting operations in the workplace
- Allocating work and checking people’s performance in the workplace
What does this course cost?
£656.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
25 (Thursday) 8:30 am - 26 (Friday) 3:30 pm
29nov(nov 29)8:30 am02dec(dec 2)3:30 pmTelehandler CPCS A17c4 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Maneuvering progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£856.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
November 29 (Monday) 8:30 am - December 2 (Thursday) 3:30 pm
29nov(nov 29)8:30 am03dec(dec 3)3:30 pmMobile Crane Course CPCS A605-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£2456.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
November 29 (Monday) 8:30 am - December 3 (Friday) 3:30 pm
29nov(nov 29)8:30 am03dec(dec 3)3:30 pm360 Excavator above 10 tons CPCS A59a5 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1256.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
November 29 (Monday) 8:30 am - December 3 (Friday) 3:30 pm
29nov(nov 29)8:30 am03dec(dec 3)3:30 pm360 Excavator & Dumper CPCS A59a & A09a5 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1612.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
November 29 (Monday) 8:30 am - December 3 (Friday) 3:30 pm
december
29nov(nov 29)8:30 am02dec(dec 2)3:30 pmTelehandler CPCS A17c4 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Maneuvering progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£856.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
November 29 (Monday) 8:30 am - December 2 (Thursday) 3:30 pm
29nov(nov 29)8:30 am03dec(dec 3)3:30 pmMobile Crane Course CPCS A605-days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£2456.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
November 29 (Monday) 8:30 am - December 3 (Friday) 3:30 pm
29nov(nov 29)8:30 am03dec(dec 3)3:30 pm360 Excavator above 10 tons CPCS A59a5 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1256.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
November 29 (Monday) 8:30 am - December 3 (Friday) 3:30 pm
29nov(nov 29)8:30 am03dec(dec 3)3:30 pm360 Excavator & Dumper CPCS A59a & A09a5 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1612.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
November 29 (Monday) 8:30 am - December 3 (Friday) 3:30 pm
01dec8:30 am03(dec 3)3:30 pmMobile Crane Course CPCS A603 days
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1656.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
1 (Wednesday) 8:30 am - 3 (Friday) 3:30 pm
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£1112.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
6 (Monday) 8:30 am - 8 (Wednesday) 3:30 pm
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£812.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
7 (Tuesday) 8:30 am - 8 (Wednesday) 3:30 pm
07dec(dec 7)8:30 am08(dec 8)3:30 pmForward Tipping Dumper CPCS A09a2 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£556.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
7 (Tuesday) 8:30 am - 8 (Wednesday) 3:30 pm
07dec(dec 7)8:30 am08(dec 8)3:30 pmRide on Roller CPCS A312 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£556.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
7 (Tuesday) 8:30 am - 8 (Wednesday) 3:30 pm
08dec(dec 8)8:30 am10(dec 10)3:30 pm360 Excavator above 10 tons CPCS A59a3 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£876.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
8 (Wednesday) 8:30 am - 10 (Friday) 3:30 pm
09dec(dec 9)8:30 am10(dec 10)3:30 pm360 Excavator above 10 tons CPCS A59a2 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£656.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
9 (Thursday) 8:30 am - 10 (Friday) 3:30 pm
13dec(dec 13)8:30 am15(dec 15)3:30 pmTelehandler CPCS A17c3 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Maneuvering progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£756.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
13 (Monday) 8:30 am - 15 (Wednesday) 3:30 pm
14dec(dec 14)8:30 am15(dec 15)3:30 pmTelehandler CPCS A17c2 day course
Event Details
What does this course include? Basic construction, names of components and the purpose and use of all controls and gauges Use of the operator’s handbook, etc Pre-use start, running checks
more
Event Details
What does this course include?
- Basic construction, names of components and the purpose and use of all controls and gauges
- Use of the operator’s handbook, etc
- Pre-use start, running checks and close-down procedure
- Preparing the machine for site and road travel
- Attaching trailed and mounted implements to the machine
- Travelling the machine over different terrain including rough, undulating ground, with mounted and trailed implements
- Travelling up and down substantial inclines, with and without mounted and trailed implements
- Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
- Precautions and actions for underground and overhead services and other hazards
- Loading procedures
- Placing the Machine in an out-of-service condition
- Loading and unloading procedures on and off a transporter
What does this course cost?
£556.00 + VAT per person
Where is the training?
Atherstone, Warwickshire
Time
14 (Tuesday) 8:30 am - 15 (Wednesday) 3:30 pm
15dec(dec 15)8:30 am17(dec 17)3:30 pmSlinger / Signaller CPCS A40a3 day course
Event Details
What does this course include? Attaching and preparing suspended loads for movement using lifting accessories in the workplace Guiding, positioning and placing suspended loads in the workplace Conforming to general
Event Details
What does this course include?
- Attaching and preparing suspended loads for movement using lifting accessories in the workplace
- Guiding, positioning and placing suspended loads in the workplace
- Conforming to general health, safety and welfare in the workplace
- Conforming to productive working practices in the workplace
What does this course cost?
£956.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
15 (Wednesday) 8:30 am - 17 (Friday) 3:30 pm
16dec(dec 16)8:30 am17(dec 17)3:30 pmCrane Supervisor CPCS A622 day course
Event Details
What does this course include? Developing and maintaining good occupational working relationships in the workplace Supervising Lifting Operations using lifting equipment in the workplace Maintaining systems for health, safety, welfare
more
Event Details
What does this course include?
- Developing and maintaining good occupational working relationships in the workplace
- Supervising Lifting Operations using lifting equipment in the workplace
- Maintaining systems for health, safety, welfare and environmental protection in the workplace
- Co-ordinating and organising the control of work in the workplace
- Allocating and monitoring the use of plant, equipment or machinery in the workplace
- Maintaining the dimensional accuracy of the work in the workplace
- Co-ordinating preparation work for site or lifting operations in the workplace
- Allocating work and checking people’s performance in the workplace
What does this course cost?
£656.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
16 (Thursday) 8:30 am - 17 (Friday) 3:30 pm
16dec(dec 16)8:30 am17(dec 17)3:30 pmSlinger / Signaller CPCS A40a2 day course
Event Details
What does this course include? Attaching and preparing suspended loads for movement using lifting accessories in the workplace Guiding, positioning and placing suspended loads in the workplace Conforming to general
Event Details
What does this course include?
- Attaching and preparing suspended loads for movement using lifting accessories in the workplace
- Guiding, positioning and placing suspended loads in the workplace
- Conforming to general health, safety and welfare in the workplace
- Conforming to productive working practices in the workplace
What does this course cost?
£656.00 + VAT per person
Where is the training?
Brownhills, Birmingham
Time
16 (Thursday) 8:30 am - 17 (Friday) 3:30 pm